DSP3-150 3 Channel Amplifier

More Power, less Problems
We completely misnamed the DSP3-150 Amplifier. Why? The amplifier puts out a combined 600w of clean, high fidelity audio. Two channels at 150w and the third clocks in a whopping 300w. This makes that third channel perfect for architectural subwoofers, which often have to sit in line with full-range loudspeakers. Best of all, the preconfigured digital signal processing and in-depth editor allow you to truly dial in a room, regardless of experience with equalization software.

Flexible Options
With a selection of DSP presets preloaded to match every outdoor speaker in the OA arsenal, set-up is as easy as selecting the one that’s right for your design configuration. Or, with a total of 64 presets, you can customise and store settings for each specific project should you choose.

Self Defence
Integrated compressors and limiters stand guard to protect the loudspeakers from abuse and ensure the long, healthy life of the system. A signal sensing circuit awakens the amplifier when the signal is detected saving power when not in operation but springing to life when needed.

Designed for the smaller outdoor system, be it Landscape Seasons range or the Origin Acoustics Bollards.

3 Channel
• Left/right: 2 x 150 watts @ 4 ohms + 300 watts @ 6 ohms for the Sub channel.
• Class D NXP Amplifier Module.
• Over-Current, Over/Under Voltage, Output DC and Over-Temperature Protection.